Machine pipeline cleaning pre film agent is a chemical used for cleaning and protecting machine pipelines. It is usually a liquid composed of multiple components, with the functions of removing dirt, preventing corrosion, and forming a pre film layer.
The use of machine pipeline cleaning pre film agents can achieve the following objectives:
Removing dirt: The active ingredients in the pre film agent can effectively dissolve and remove sediment, dirt, and scale in the pipeline, maintain the smoothness of the pipeline, and improve the operational efficiency of the equipment.
Prevention of corrosion: The corrosion inhibitor and corrosion inhibitor in the pre coating agent can form a protective film layer, reduce the corrosion rate of metal pipelines, and extend the service life of pipelines.
Forming a pre film layer: The components of the pre film agent can form a thin film inside the pipeline, reducing the roughness of the pipeline surface, reducing fluid resistance, and improving the anti fouling performance of the pipeline.
When using machine pipeline cleaning pre film agent, the following steps need to be followed:
Firstly, dilute the pre film agent with an appropriate amount of water and prepare according to the proportion specified in the product manual.
Injecting the pre film agent solution into the pipeline system to be cleaned can be achieved through pumps or other methods.
Allow the pre film agent to remain in the pipeline for a period of time, so that it can effectively act on the dirt and corroded surfaces inside the pipeline.
For stubborn dirt or scaling, it may be necessary to use brushes, high-pressure water jets, or other cleaning tools for mechanical treatment.
After cleaning, thoroughly rinse the pipeline with clean water to ensure that the pre film agent and dirt residue are completely removed.
It should be noted that different pre film agent products may have different usage methods and precautions. When using, it is necessary to carefully read the product manual and follow the recommended operating steps. In addition, personal protective equipment such as protective gloves and glasses should be worn during use to avoid contact with skin and eyes, and attention should be paid to safe operation.