The method of using stuffing agents is different according to specific applications and product guides. Here are the basic steps to use stuffing agents under normal circumstances:
Preparatory work: Make sure the quality of the stuffing agent is good, and store and save according to the recommendations in the product manual. Check the cleanliness of systems such as reactors, equipment or pipelines. If there are scaling or pollutants, please clean it first.
Determine dosage: According to the water quality analysis report, equipment requirements, and suggestions provided by the manufacturer provided by manufacturers, the proper dosage dose is determined. Using too high or too low doses may affect the effect of dirt.
Preparatory processing: According to the need, you can perform some pre -processing steps before adding a dirt, such as pH regulation, dissolving solid particles. Make sure that the system is under suitable conditions to enhance the effect of stuffing agents.
Add a stuffing agent: Add the stool resistant to the circulating water or other liquid systems according to the recommended dose. Usually you can add it in various ways, such as adding it in water for stirring and dissolving, or using the equipment such as measuring pumps for evenly.
Mixed and cycle: Make sure the stuffing agent is fully mixed with pollutants in the water or liquid system. If there is a circulating water system, the circulating water pump can be started to ensure that the stuffing agent is evenly distributed throughout the system.
Monitoring and adjustment: Regularly monitor the status of the water quality, film or equipment of the system, and adjust it as needed. According to the actual situation, the dosage, frequency, or other parameters of the stuffing agent may need to be adjusted to achieve the best dirt resistance effect.
Please note that before using a stuffing agent, you should read the product manual carefully and follow the guidance and suggestions provided by the manufacturer. According to the specific circumstances, it may also need to comply with the specifications and relevant regulations of specific industries.