The use of flocculants may be different from different product types or uses, but the general use method is as follows:
Confirm the type of water and pollutants. Before using a flocculant, you need to understand which suspended substances and pollutants exist in the water to be treated in order to choose the appropriate flocculant.
Solk the flocculant in proportion. According to the instructions of the use, the flocculant powder or liquid is added to the water according to the proportion, and mixes thoroughly and mixes it completely until the flocculant is completely dissolved.
Add to treat water. The dissolved flocculant liquid evenly adds the water to be treated to ensure that it is fully mixed. It is generally recommended to use mechanical stirring or gas blowing to promote mixing.
Waiting for enough time. Although the flocculant can quickly form a collective, it still takes a certain time to achieve the best results. This time may be different due to different types of flocculant, water quality and pollutants. There will be specific suggestions in the instructions.
Separation and filtering. After sufficient time, the flocculation body will gradually precipitate or rise to the surface. It is necessary to use the appropriate separation method to remove according to different types of pollutant types and treatment requirements. The usual methods include gravity precipitation, qi floating separation, filtering or centrifugation.
Treatment of crystal residues and waste liquids. The solid crystalline residue and waste liquid generated during the separation process need to be properly handled. If a flocculant contains chemical material components, it is necessary to follow relevant safety operating procedures and environmental protection requirements.
Please note that when using a flocculant, you should read it carefully and operate in accordance with the instructions of the use, and meet the safety and environmental protection requirements. At the same time, it is necessary to choose proper maintenance and cleaning process to ensure the normal operation of the processing equipment and pipelines.